JMC4805 Channel Gate Controller, it is a servo electronic control product of motor drive + traffic logic that Jiayu introduces or pedestrian gate equipment. It supports speed gate, swing gate, wing gate, translation gate and other equipment types, which can meet the requirements of bus stations, commercial buildings, hospitals, schools and other exit control application scenarios.
![JMC4805 Channel Gate Controller]( "JMC4805 Channel Gate Controller")
Features
● It is equipped with low voltage servo motor, incremental encoder feedback interface, built-in PMSM and vector control servo control technology.
● Integration of the industry's leading channel movement control logic + infrared traffic logic, real-time detection of motor movement and pedestrian passing position.
● For the use of violent breaking and other scenarios, the internal design has a special circuit to ensure the stability of the controller and power supply.
● It supports multiple communication modes such as RS232, RS485 and CAN, and provides Modbus communication protocol, which CAN be connected to the upper ipc.
● Supporting digital debugger, LCD debugger, PC upper computer and other debugging tools.
Specification
Input voltage | DC 24 / 48V |
Rated / Peak current | 5A / 15A |
Suitable motor | Low voltage servo motor |
Encoder feedback type | Incremental (pulse type) |
Communication interface | RS232 / RS485 / CAN |
Hardware protection | Over-current protection Short-circuit protection Reverse polarity protection |
Light output | Courtesy lights | Traffic lights | RGB lights |
Voice output | Buzzer, voice 1 way |
Infrared input | 6 independent interfaces, compatible with PNP and NPN types |
Input/ Output signal | 2 entrance guard + 3 extended inputs/outputs |
Special output | 1-way clutch output |
Power failure switch on | External 12V 1.3AH battery |
Violence broke into | Built-in brake module |
Multi-Function Buttons | Open doors, set zero, restore default values, etc |
Working Temperature | -20℃ ~ 55℃ |
Working Humidity | 90%，No condensation |
Installation Dimension
![JMC4805 Channel Gate Controller]( "JMC4805 Channel Gate Controller")
Power supply selection
| The power supply | Specification | Recommend |
| Single power solution | One DC 24V power supply is configured on both sides,with a single power supply no less than 300W | 320W / 24V |
| Double power solution | One DC 24V power supply is configured on each side,with a single power supply n-o less than 150W | 150W / 24V |
| Power failure swith on | Specification | Recommend |
| Single power solution | One DC 12V battery or super-capacitor is confi-gured on both sides | EPM280 super-capacitor
|
| Double power solution | One DC 12V battery or super-capacitor is confi-gured on each side |
Electrical wiring
![JMC4805 Channel Gate Controller]( "JMC4805 Channel Gate Controller")